Nitecore Digcharger D4 LCD Charger For Li-Ion, Ni-Cd, Ni-mH Batteries

The D4 Nitecore charger is able to accommodate four batteries of varying sizes and chemistries. Integrated microprocessor automatically identifies battery types and selects appropriate charging voltage and current. Automatically detects battery status and selects the appropriate charge mode (CC, CV, and -dV/dt).

• 4-Bay Battery Charger
• Input: AC 100-240V 50/60Hz 0.35A, DC 12V 1A
• Output Current:375mA x 4 / 0.75A x 2
• Output Voltage: 3.7 V
• Over-Charge Protection
• Overheating Protection
• Reverse Polarity Protection
• Short-Circuit Protection
• Compatible with: IMR/Li-ion/LiFePO4 - 10440,14500,16340,17500,17670,18350,18490,18650,22650,26650 and Ni-MH/Ni-Cd - AA,AAA,AAAA,C Batteries

• 1x Nitecore Digcharger D4 LCD Charger
• 1x Power Cord
• 1x User Manual

The following guidelines should be strictly followed with regard to your batteries:

1. Only recharge these devices with the intended charging cable or adapter. Using chargers with incorrect voltage or current can cause a fire or catastrophic failure.
2. Never leave a charging battery unattended.
3. Never charge a battery overnight while you sleep.
4. Never leave a battery on your charger longer than necessary. When it is full, unplug your charger and remove the battery. Leaving a battery on charge when it is full will degrade its performance and may result in a fire.